5-9
LDPI,LDFI,ANDPI,ANDFI,ORPI,ORFI
1
2
3
4
5
6
7
8
5.1 Contact Instructions
5.1.3
Pulse NOT operation start, pulse NOT series connection, pulse NOT parallel connection (LDPI,LDFI,ANDPI,ANDFI,ORPI,ORFI)
Program Example
(1) The following program stores 0 into D0 when X0 is on, off, or turns from on to off, or M0 is
on, off, or turns from off to on.
[Ladder Mode] [List Mode]
(2) The following program stores 0 into D0 when X0 is on and b10 (bit 11) of D0 is on, off, or
turns from on to off.
Ladder Mode] [List Mode]
Step
Instruction Device
Step
Instruction Device
To Next Page
Loading...
Need help?
General
