Mitsubishi MELSEC Q Series Programming Manual

7-288
SQRD(P)
7.12.20 Square root operation for floating-point data
(Double precision) (SQRD(P))
SQRD(P)
Function
(1) Returns the square root of the value designated at , and stores the operation result in the
device number designated at .
(2) Only positive values can be designated by . (Operation cannot be performed on negative
numbers.)
(3) When the operation results in -0 or an underflow, the result is processed as 0.
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and
an error code is stored into SD0.
• The value designated by is a negative number. (Error code: 4100)
• The value of the specified device is not in the following range: (Error code: 4140)
0,2
-1022
| value of specified device | < 2
1024
• The value of the designated device is 0. (Error code: 4140)
• The result exceeds the following range (Operation results in an overflow):
2
1024
| Operation result | (Error code: 4141)
: Data of which the square root is obtained or head number of the devices where the data is stored
(real number)
: Head number of the devices where the operation result will be stored (real number)
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
E
Other
Bit Word Bit Word
–– –– ––
–– –– –– ––
Universal
Basic
Process
High
performance
Redundant
LCPU
Command
Command
SQRDP
SQRD
SQRDP
SQRD S D
S D
S
D
S
D
S
D
()
64-bit floating-point
real number
64-bit floating-point
real number
+3
S
+2
S
S
+1
S
+3
D
+2
D
D
+1
D
S
S

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English