7-392
ZRWRB(P)
7.18.5 File register direct 1-byte write (ZRWRB(P))
ZRWRB(P)
Function
(1) Writes the lower bits of data stored in the device designated by that does not signify a
block number to the file register of the serial byte number designated by n.
The upper 8 bits of data in the device designated by are ignored.
(2) The correspondence between file register numbers and serial byte numbers is as indicated
below:
n : Serial byte number for the file register to be written (BIN 32 bits)
: Number of the device where the data to be written is stored (BIN 16 bits)
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
K, H
Other
Bit Word Bit Word
n ––
––
Basic
Process
High
performance
Redundant
Universal
LCPU
Command
Command
ZRWRB
ZRWRBP
n
n
ZRWRB
ZRWRBP
S
S
D
S
S
S
Area for
block No. 0
Area for
block No. 1
Area for
block No. 2
ZR65536
ZR65535
ZR32768
ZR0
ZR32767
Serial byte number
n
Contents to
be written
Ignored
b0b7b15 b8
Write destination
designation
Writing the data
File register
S
ZR0
Serial byte No. 0Serial byte No. 1
Serial byte No. 2Serial byte No. 3
ZR1
Serial byte No. 4
Serial byte No. 5
Serial byte No. 5000Serial byte No. 5001
Serial byte No. 5002Serial byte No. 5003
Serial byte No. 5004Serial byte No. 5005
Serial byte No. 5006
Serial byte No. 5007
ZR2501
ZR2502
ZR2503
Storage destination
when an even number is designated
Storage destination
when an odd number is designated
ZR2
ZR2500
b15 b8
b7
b0
To Next Page
Loading...
Need help?
General
