A-14
7.17.2 Program output OFF standby instruction (POFF(P))................................................ 7 - 377
7.17.3 Program scan execution registration instruction (PSCAN(P)) .................................. 7 - 379
7.17.4 Program low speed execution registration instruction (PLOW(P)) ........................... 7 - 381
7.17.5 Program execution status check instruction (PCHK)................................................ 7 - 383
7.18 Other instructions 7 - 385
7.18.1 Resetting watchdog timer (WDT(P))......................................................................... 7 - 385
7.18.2 Timing pulse generation (DUTY) .............................................................................. 7 - 387
7.18.3 Time check instruction (TIMCHK)............................................................................. 7 - 389
7.18.4 Direct 1-byte read from file register (ZRRDB(P))...................................................... 7 - 390
7.18.5 File register direct 1-byte write (ZRWRB(P)) ............................................................ 7 - 392
7.18.6 Indirect address read operations (ADRSET(P)) ....................................................... 7 - 394
7.18.7 Numerical key input from keyboard (KEY) ............................................................... 7 - 395
7.18.8 Batch save or recovery of index register (ZPUSH(P),ZPOP(P)) .............................. 7 - 399
7.18.9 Reading Module Information (UNIRD(P))................................................................. 7 - 401
7.18.10 Reading module model name (TYPERD(P))............................................................ 7 - 408
7.18.11 Trace Set/Reset (TRACE,TRACER) ........................................................................ 7 - 413
7.18.12 Writing Data to Designated File (SP.FWRITE)......................................................... 7 - 415
7.18.13 Reading Data from Designated File (SP.FREAD) .................................................... 7 - 427
7.18.14 Writing Data to Standard ROM (SP.DEVST)............................................................ 7 - 439
7.18.15 Read Data from Standard ROM (S(P).DEVLD)........................................................ 7 - 441
7.18.16 Load Program from Memory Card (PLOADP).......................................................... 7 - 443
7.18.17 Unload Program from Program Memory (PUNLOADP) ........................................... 7 - 446
7.18.18 Load + Unload (PSWAPP) ....................................................................................... 7 - 448
7.18.19 High-speed Block Transfer of File Register (RBMOV(P)) ........................................ 7 - 451
7.18.20 User Message (UMSG) ............................................................................................ 7 - 456
Common Instructions 2/2
8. INSTRUCTIONS FOR DATA LINK 8 - 1 to 8 - 10
8.1 Network refresh instructions 8 - 2
8.1.1 Refresh instruction for the designated module (S(P).ZCOM)....................................... 8 - 2
8.2 Reading/Writing Routing Information 8 - 6
8.2.1 Reading routing information (S(P).RTREAD) ............................................................... 8 - 6
8.2.2 Registering routing information (S(P).RTWRITE)......................................................... 8 - 8
9. Multiple CPU dedicated instruction 9 - 1 to 9 - 18
9.1 Writing to the CPU Shared Memory of Host CPU 9 - 2
9.1.1 Write to Host CPU Shared Memory (S(P).TO) ............................................................. 9 - 4
9.1.2 Writing to host station CPU shared memory (TO(P), DTO(P))..................................... 9 - 7
9.2 Reading from the CPU Shared Memory of another CPU 9 - 11
9.2.1 Reading from Other CPU Shared Memory (FROM(P), DFRO(P)) ............................. 9 - 12
10. QCPU INSTRUCTIONS 10 - 1 to 10 - 20
10.1 Overview 10 - 2
10.2 Writing Devices to Another CPU (D(P).DDWR) 10 - 13
10.3 Reading Devices from Another CPU (D(P).DDRD) 10 - 17
To Next Page
Loading...
Need help?
General
