Mitsubishi MELSEC Q Series Programming Manual

6-109
EMOV(P)
1
2
3
4
4
6
7
8
6.4 Data Transfer Instructions 6.4.2 Floating-point data transfer (Single precision) (EMOV(P))
6.4.2 Floating-point data transfer (Single precision) (EMOV(P))
EMOV(P)
*1:Available only in multiple Universal model QCPU, LCPU
Function
Transfers 32-bit floating decimal point type real number data being stored at the device
designated by to a device designated by .
Operation Error
(1) There are no operation errors associated with the EMOV(P) instruction.
Basic model QCPU: The upper five digits of the serial No. are "04122" or larger.
: Data to be transferred or number of the device to which the data to be transferred is stored (real number)
:
The number of the device to which the transferred data will be stored (real number)
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
E
Other
Bit Word Bit Word
–– ––
*1
––
–– ––
*1
–– ––
Process
High
performance
Redundant Universal
Ver.
Basic
LCPU
Command
Command
EMOV
EMOVP
S D
S D
EMOV
EMOVP
S
D
S
D
S S
D
4.23542 4.23542
+1
+1
32-bit floating-point
real number
32-bit floating-point
real number
S DS D
Transfer

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English