Mitsubishi MELSEC Q Series Programming Manual

6-154
TTMR
Operation Error
(1) In the following case, an operation error occurs, the error flag (SM0) turns ON, and an error
code is stored into SD0.
• The device specified by exceeds the range of the corresponding device.
(For the Universal model QCPU, LCPU.) (Error code: 4101)
Program Example
(1) The following program stores the amount of time that X0 is ON at D0.
[Ladder Mode] [List Mode]
D
Step
Instruction
Device

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English