Driver’s switches
The driver’s switches can be used to operate
all door windows. A window can be opened
or closed by operating the corresponding
switch.
Press the switch down to open the window,
and pull up the switch to close it.
If the switch for the driver’s window is fully
pressed down/pulled up, the door window au-
tomatically opens/closes completely.
If you want to stop the window movement,
operate the switch lightly in the reverse direc-
tion.
NOTE
l
When the door window does not close auto-
matically even if the switch is fully pulled
up, pull up the door window switch until the
window has been fully closed.
You should now be able to operate the door
window in the normal fashion.
Passenger’s switches
The passenger’s switches can be used to op-
erate the corresponding passenger’s door
windows.
Press the switch down for opening the win-
dow, and pull up the switch for closing it.
NOTE
l
Repeated operation with the Plug-in Hybrid
EV System stopped will run down the auxil-
iary battery. Operate the window switches
only while the Plug-in Hybrid EV System is
operating.
l
The rear door windows only open halfway.
Lock switch
E00303101263
When this switch is operated, the passenger’s
switches cannot be used to open or close the
door windows and the driver’s switch cannot
open or close any door windows other than
the driver’s door window.
To unlock, press it once again.
1- Lock
2- Unlock
WARNING
l
A child may tamper with the switch at the
risk of its hands or head being trapped in
the window. When driving with a child in
the vehicle, please press the window lock
switch to disable the passenger’s switches.
Timer function
E00302402051
The door windows can be opened or closed
for 30 seconds after putting the operation
mode in OFF or ACC from ON.
However, once the driver’s door or the front
passenger’s door is opened, the windows can-
not be operated.
Electric window control
4-35
OGGE19E1
Locking and unlocking
4
To Next Page
Loading...
