EasyManua.ls Logo

Mitsubishi Outlander PHEV 2019

Mitsubishi Outlander PHEV 2019
602 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ACC power auto-cutout func-
tion
E00632801265
After approximately 30 minutes have elapsed
with the operation mode in ACC, the func-
tion automatically cuts out the power for the
audio system and other electric devices that
can be operated with that position.
When the power switch operates again, the
power is supplied again.
NOTE
l
It is possible to modify functions as follows:
The time until the power cuts out can be
changed to approximately 60 minutes.
The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult
a MITSUBISHI MOTORS Authorized
Service Point.
On vehicles equipped with the Smart-
phone Link Display Audio or the
MITSUBISHI Multi-Communication Sys-
tem (MMCS), screen operations can be
used to make the adjustment.
Refer to the separate owners manual for
details.
Operation mode OFF reminder
system
E00632201445
When the operation mode is in any mode oth-
er than OFF; if you try to lock the doors and
tailgate by pressing the drivers or front pas-
sengers door lock/unlock switch, or the tail-
gate LOCK switch, a warning display will
appear, and the outer buzzer will sound pre-
venting you from locking the doors and tail-
gate.
Operation mode ON reminder
system
E00632301068
If the drivers door is opened while the Plug-
in Hybrid EV System is stopped and the op-
eration mode in any mode other than OFF,
the operation mode ON reminder inner buz-
zer sounds intermittently to remind you to put
the operation mode in OFF.
Starting and stopping the
Plug-in Hybrid EV System
E00620601295
Starting the Plug-in Hybrid EV
System
E00620701661
CAUTION
l
When the Plug-in Hybrid EV System warn-
ing lamp comes on while the READY indi-
cator is on, avoid high-speed driving and
have your vehicle inspected by a
MITSUBISHI MOTORS Authorized Serv-
ice Point as soon as possible. (Refer to
“Plug-in Hybrid EV System warning lamp”
on page 6-57.)
l
Never attempt to start the engine by pushing
or pulling the vehicle.
1. Check that the EV charging cable is not
connected to your vehicle.
2. Fasten the seat belt.
3. Make sure the parking brake is applied.
4. Press and hold the brake pedal down
firmly with your right foot.
Starting and stopping the Plug-in Hybrid EV System
7-13
OGGE19E1
Starting and driving
7

Table of Contents

Other manuals for Mitsubishi Outlander PHEV 2019

Related product manuals