EasyManua.ls Logo

Mitsubishi Outlander PHEV 2019

Mitsubishi Outlander PHEV 2019
602 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE
l
The engine oil will deteriorate rapidly if the
vehicle is subjected to severe conditions, re-
quiring earlier oil replacement.
Please refer to the maintenance schedule.
l
For information on how to dispose of used
engine oil, refer to page 2-18.
Recommended engine oil vis-
cosity
l
Select engine oil of the proper SAE vis-
cosity number according to the atmos-
pheric temperature.
SAE 0W-20, 0W-30, 5W-20, 5W-30, and
5W-40 engine oils can only be used if
they meet ACEA A3/B3, A3/B4 or
A5/B5 and API SM (or higher) specifi-
cations.
l
Use engine oil conforming to the follow-
ing classification:
API classification: “For service SM”
or higher
ILSAC certificated oil
ACEA classification:
“For service A1/B1, A3/B3, A3/B4 or
A5/B5”
NOTE
l
Use of additives is not recommended since
they may reduce the effectiveness of addi-
tives already included in the engine oil. It
may result in failure of the mechanical as-
sembly.
Engine coolant/Plug-in
hybrid EV system coolant
E01000503466
To check the coolant level
A transparent engine coolant reserve tank (A)
and EV cooling system reserve tank (B) is lo-
cated in the engine compartment.
The coolant level in this tank should be kept
between the “LOW” and “FULL” marks
when measured while the engine and the
plug-in hybrid EV system are cold.
FULL
LOW
FULL
LOW
Engine coolant/Plug-in hybrid EV system coolant
11-06
OGGE19E1
Maintenance
11

Table of Contents

Other manuals for Mitsubishi Outlander PHEV 2019

Related product manuals