Charging system specifications
E01101901190
Normal charging system
Rated input voltage AC 230V (single phase)
Rated input frequency 50 Hz/60 Hz
Maximum rated current
10 A
*1
, 8 A
*1
Maximum power consumption
3.6 kVA
*2
Applicable standards
Charging cable
(with connector
and control box)
EN61851-1
IEC61851-1
IEC62196-1
On board charger
EN61851-21
IEC61851-21
Leakage current sensitivity in cable control box 20 mA
Charging mode
Based on IEC61851-1
Mode 2/Case B
*1
Mode 3/Case C
*2
IP degrees
IP44: When a charge connector is connected
IP55: When charging lid is closed and vehicle is moving
Quick charging system
Applicable standards
IEC62196-1
CHAdeMO
Maximum input current 60 A
*1
: When using a genuine charging cable with control box
*2
: When using a home or public charging device (EVSE: Electric Vehicles Supply Equipment)
Charging system specifications
12-07
OGGE19E1
Specifications
12
To Next Page
Loading...
