NOTE
•
Pull the lever towards you.
•
Turn the combination headlamps and dip-
per switch to the “ ” or “ ” position.
•
Put the operation mode in ON.
l
It is possible to modify functions as follows:
•
The time that the headlamps remain on
can be changed.
•
The coming home light function can be
deactivated.
For further information, please contact your
MITSUBISHI MOTORS Authorized Serv-
ice Point.
On vehicles equipped with the Smartphone
Link Display Audio or the MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the
adjustment. Refer to the separate owner’s
manual for details.
Headlamp levelling
E00517400031
Headlamp levelling switch (ex-
cept for vehicle with LED
headlamps)
E00517502023
The angle of the headlamp beam varies de-
pending on the load carried by the vehicle.
The headlamp levelling switch can be used to
adjust the headlamp illumination distance
(when the lower beam is illuminated) so that
the headlamps’ glare does not distract other
drivers.
Set the switch according to the following ta-
ble.
CAUTION
l
Always perform adjustments before driving.
Do not attempt to adjust while driving, as it
could cause an accident.
Vehicle condition Switch position
“0”
Vehicle condition Switch position
“0”
“1”
“2”
“2”
●:1 person
:Full luggage loading
Switch position
0-
Driver only/Driver + 1
front passenger
Switch position
1-
5 passengers (including
driver)
Switch position
2-
5 passengers (including
driver) + Full luggage
loading/Driver + Full lug-
gage loading
Headlamp levelling
6-66
OGGE19E1
Instruments and controls
6
To Next Page
Loading...
Need help?
General
