WARNING
l
Sudden regenerative brake may cause the
tyres to skid.
Select this position according to the road
conditions and vehicle speed.
CAUTION
l
When the capacity of the drive battery is
close to full or when the drive battery tem-
perature is low, the regenerative brake will
become less effective.
In such case, depress the brake pedal strong-
ly.
NOTE
l
If a large regenerative braking force is gen-
erated by using the selector lever or the re-
generative braking level selector, the stop
lamps will be automatically illuminated.
Electrical Parking switch
E00636600062
When you park your vehicle, be sure to apply
the parking brake and press the electrical
parking switch to lock the wheels. The indi-
cator on the switch illuminates in green and
the select position indicator displays “P” on
the information screen in the meter.
CAUTION
l
If you operate the electrical parking switch
and the select lever repeatedly within a short
time, the shifting from the “P” position or to
the “P” position is restrained for a certain
period for the system protection. In such a
case, wait for a while and then perform the
operation.
l
If the parking lock mechanism is faulty, a
warning is displayed on the information
screen in the multi-information display.
When this warning is displayed, park on a
flat place with the parking brake securely
applied. Have your vehicle inspected by a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
l
If you press the electrical parking switch be-
fore your vehicle stops completely, the vehi-
cle makes a sudden stop, which may cause
injury to passengers. This also can be a
cause of failure of the vehicle.
l
Do not place an object around the electrical
parking switch. The electrical parking switch
may be pressed by the object when you
place it there or when you somehow touch it.
This will cause unintentional shifting to “P”
or “N” position, which may lead to an acci-
dent.
Electrical Parking switch
7-18
OGGE19E1
Starting and driving
7
To Next Page
Loading...
Need help?
General
