2. While lifting the seat belt’s buckle (A),
gently lower the seat cushion. Make sure
that there is a hook (B) at the position
shown in the illustration.
3. Push down the seat cushion until it locks
into place.
4. Make sure the seat belt’s buckle is on the
seat cushion.
Making a flat seat
E00404301931
By removing the head restraints and fully re-
clining the seatbacks of the seats, one large
flat seat is achieved.
WARNING
l
Never drive with passengers on the flat
seat. This is highly dangerous.
CAUTION
l
To make a flat seat, stop the vehicle in a safe
place.
l
Make sure the seat is adjusted by an adult or
with adult supervision for correct and safe
operation.
l
Do not walk around on top of the seats after
they have been laid flat.
l
To ensure the seats are locked securely, at-
tempt to move them back and forth.
l
Do not jump on, or impact the seatbacks
heavily.
l
To raise the seatback, put a hand on the seat-
back and raise slowly. Never have a child do
this operation, or an unexpected accident
may result.
1. Remove the head restraints from the
front seats, raise the armrest and remove
the cargo area cover. (Refer to “Head re-
straints” on page 5-05, “Armrest” on
page 5-05 and “Cargo area cover” on
page 8-85)
Making a flat seat
5-08
OGGE19E1
Seats and seat belts
5
To Next Page
Loading...
Need help?
General
