CAUTION
l
When folding the seat, be sure not to catch
your hand or leg.
NOTE
l
It is possible to fold the seat independently
on each side.
To fold
1. Lower the head restraints of the rear seat
to the lowest position.
Refer to “Head restraints” on page 5-05.
2. Store the seat belt for the rear centre
seating position.
Refer to “Rear-centre 3-point type seat
belt” on page 5-13.
3. Lift the front end of the seat cushion.
4. Flip the seat cushion forward.
5. Fold the seat belt buckles forward.
CAUTION
l
Do not allow any person to get on the plastic
cover (A), and do not place luggage on it.
Doing so could damage cover.
6. Pull up the lever, then fold the seatback
forward.
CAUTION
l
Do not allow any person to sit on the flipped
seat cushion, and do not place luggage on it.
The seat’s mounting fittings could bend un-
der the weight, making it impossible for the
seat to be retained on the vehicle.
To return
1. Raise the seatback until it locks securely
into place.
Making a luggage area
5-07
OGGE19E1
Seats and seat belts
5
To Next Page
Loading...
Need help?
General
