If the keyless operation key is
not operating properly
E00632901237
Insert the keyless operation key into the key
slot. Starting the Plug-in Hybrid EV System
and changing the operation mode should be
now possible.
Remove the keyless operation key from the
key slot after starting the Plug-in Hybrid EV
System or changing the operation mode.
NOTE
l
Do not insert into the key slot anything other
than the keyless operation key. This could
cause damage or a malfunction.
NOTE
l
Remove the object or additional key from
the the keyless operation key before insert-
ing the key into the key slot. The vehicle
may not be able to receive the registered ID
code from the registered key. Therefore, the
Plug-in Hybrid EV System may not start and
the operation mode may not change.
l
The keyless operation key is fixed in the key
slot when inserted in the illustrated direc-
tion. Simply pull out the key to remove it
from the key slot.
Keyless operation key remind-
er
E00633001046
If the operation mode is in OFF and the driv-
er’s door is opened with the keyless operation
key in the key slot, the outer buzzer sounds
for approximately 3 seconds and the inner
buzzer sounds for approximately 1 minute or
a warning display will appear to remind you
to remove the key.
Selector lever (Joystick
type)
E00636100100
Selector lever operation
E00636200097
The selector lever always returns to its home
( ● ) position when it is released.
Selector lever (Joystick type)
7-15
OGGE19E1
Starting and driving
7
To Next Page
Loading...
Need help?
General
