EasyManua.ls Logo

Mitsubishi Outlander PHEV 2019

Mitsubishi Outlander PHEV 2019
602 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power type*
1- To adjust forward or backward
Operate the switch as indicated by the
arrows and adjust the seat to the desired
position.
2- To recline the seatback
Operate the switch as indicated by the
arrows and adjust the seatback angle to
the desired position.
3- To adjust seat height
Operate the switch as indicated by the
arrows and adjust the seat height to the
desired position.
If the entire switch is operated, then the
entire seat moves.
Heated seats*
E00401102371
The heated seats can be operated with the op-
eration mode of the power switch in ON. Op-
erate the switch as indicated by arrows.
The indication lamp (A) will illuminate while
the heater is on.
1 (HI) - Heater high (for quick heating).
2 (neu-
tral po-
sition)
- Heater off.
3 (LO) - Heater low (to keep the seat
warm).
CAUTION
l
Operate in the high position for quick heat-
ing. Once the seat is warm, set the heater to
low to keep it warm. Slight variations in seat
temperature may be felt while using the
heated seats. This is caused by the operation
of the heater’s internal thermostat and does
not indicate a malfunction.
CAUTION
l
If the following types of persons use the
heated seats, they might become too hot or
receive minor burns (red skin, heat blisters,
etc.):
Children, elderly or ill people
People with sensitive skin
Excessively tired people
People under the influence of alcohol or
sleep inducing medication (cold medicine,
etc.)
l
Do not place heavy objects on the seat or
stick pins, needles, or other pointed objects
into it.
l
Do not use a blanket, cushion, or other mate-
rial with high heat insulation properties on
the seat while using the heater; this might
cause the heater element to overheat.
l
Do not use benzine, kerosene, petrol, alcohol
or other organic solvents when cleaning the
seats. Doing so could damage not only the
seat cover, but also the heater element.
l
If water or any other liquid is spilled on the
seat, allow it to dry thoroughly before at-
tempting to use the heater. Turn the heater
off immediately if it appears to be malfunc-
tioning during use.
Front seats
5-04
OGGE19E1
Seats and seat belts
5

Table of Contents

Other manuals for Mitsubishi Outlander PHEV 2019

Related product manuals