CAUTION
l
When installing a child restraint system, remove the head restraint from the seat. However, do not remove the head restraint when installing a booster cush-
ion (see page “Installing a child restraint system to a 3-point type seat belt (with emergency locking mechanism)” on page 5-24).
l
When installing a child restraint system on the front passenger seat, adjust the front seatback angle to 2 steps rearward from the first locking position.
l
Do not sit in the middle seating position of the rear seat when installing a child restraint system to the left outboard seating position of the rear seat. Because
the child restraint interferes with the seat belt, you cannot fasten the seat belt correctly.
l
“BABY-SAFE i-SIZE” is designed for children 40 to 83 cm in height.
Definition of characters the above table:
l
U- Suitable for “universal” category restraints approved for use in this mass group.
l
L#- Suitable for particular child restraint systems. See the above table of “Recommended Child Restraint Systems”.
l
X- Seat position not suitable for children in this mass group.
Child restraint
5-21
OGGE19E1
Seats and seat belts
5
To Next Page
Loading...
