EasyManua.ls Logo

Mitsubishi Outlander PHEV 2019

Mitsubishi Outlander PHEV 2019
602 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Refer to “To resume the set speed” on page
7-50.
To deactivate
E00609702955
The set speed driving can be deactivated as
follows:
l
Press the CRUISE CONTROL ON/OFF
switch (A) (Cruise control will be turned
off.)
l
Press the “CANCEL” switch (D).
l
Depress the brake pedal.
The set speed driving is deactivated automat-
ically in any of the following ways.
l
When your speed slows to approximate-
ly 15 km/h (9 mph) or more below the
set speed because of a hill, etc.
l
When your speed slows to approximate-
ly 40 km/h (25 mph) or less.
l
When the Active Stability Control
(ASC) starts operating.
Refer to “Active stability control (ASC)”
on page 7-43.
WARNING
l
Although the set speed driving will be de-
activated when shifting to the “N” (NEU-
TRAL) position, never move the selector
lever to the “N” (NEUTRAL) position
while driving.
You would have no regenerative brake
and could cause a serious accident.
CAUTION
l
When the set speed driving is deactivated
automatically in any situation other than
those listed above, there may be a system
malfunction.
Press the CRUISE CONTROL ON/OFF
switch to turn off the cruise control and have
your vehicle inspected by a MITSUBISHI
MOTORS Authorized Service Point.
NOTE
l
You cannot operate the regenerative brake
while the adaptive cruise control system
(ACC) is operating.
l
If you perform the following operation, the
buzzer may sound and the select position
may automatically shift to “N” position.
The electrical parking switch is pressed
during driving.
The selector lever is shifted to “R” during
driving forward.
The selector lever is shifted to “D” during
driving backward.
Cruise control*
7-49
OGGE19E1
Starting and driving
7

Table of Contents

Other manuals for Mitsubishi Outlander PHEV 2019

Related product manuals