How to connect a USB memory
device
E00762001906
1. Park your vehicle in a safe place and put
the operation mode in OFF.
2. Open the USB input terminal cover.
3. Connect a commercially available USB
connector cable (A) to the USB memory
device (B).
4. Connect the USB connector cable to the
USB input terminal.
NOTE
l
Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
5. To remove the USB connector cable, put
the operation mode in OFF first and per-
form the installation steps in reverse.
How to connect an iPod
E00762101923
1. Park your vehicle in a safe place and put
the operation mode in OFF.
2. Open the USB input terminal cover.
3. Connect the connector cable to the iPod.
NOTE
l
Use a genuine connector cable from Apple
Inc.
4. Connect the connector cable to the USB
input terminal.
5. To remove the connector cable, put the
operation mode in OFF first and perform
the installation steps in reverse.
Types of connectable devices
and supported file specifica-
tions
E00762201399
Except for vehicles equipped with the
Bluetooth
®
2.0 interface
For details about the types of connectable de-
vices and supported file specifications, refer
to the following pages and manuals.
[For vehicles equipped with the
LW/MW/FM radio/CD player]
Refer to “Listen to an iPod” on page 8-33,
“Listen to Audio Files on a USB Device” on
page 8-35 and “Audio Files (MP3/WMA/
AAC)” on page 8-21.
[For vehicles equipped with the
MITSUBISHI Multi-Communication Sys-
tem (MMCS), the Smartphone Link Dis-
play Audio or the DISPLAY AUDIO]
Refer to the separate owner’s manual.
For vehicles equipped with the Bluetooth
®
2.0 interface
For details about the types of connectable de-
vices and supported file specifications, refer
to the following section.
Device types
E00762301723
Devices of the following types can be con-
nected.
USB input terminal*
8-72
OGGE19E1
For pleasant driving
8
To Next Page
Loading...
