EasyManua.ls Logo

Mitsubishi Outlander PHEV 2019

Mitsubishi Outlander PHEV 2019
602 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION
l
If the tyres have arrows (A) indicating the
correct direction of rotation, swap the front
and rear tyres on the left-hand side of the ve-
hicle and the front and rear tyres on the
right-hand side of the vehicle separately.
Keep each tyre on its original side of the ve-
hicle. When fitting the tyres, make sure the
arrows point in the direction in which the
wheels will turn when the vehicle moves for-
ward. Any tyre whose arrow points in the
wrong direction will not perform to its full
potential.
Front
CAUTION
l
Avoid the combined use of different types of
tyres.
Using different types of tyres can affect ve-
hicle performance and safety.
Snow tyres
E01002001979
The use of snow tyres is recommended for
driving on snow and ice. To preserve driving
stability, mount snow tyres of the same size
and tread pattern on all 4 wheels.
A snow tyre that is worn down more than
50% is no longer appropriate to use.
Snow tyres which do not meet specifications
must not be used.
CAUTION
l
Observe permissible maximum speed for
your snow tyres and the legal speed limit.
l
As your vehicle is equipped with a tyre pres-
sure monitoring system, only MITSUBISHI
Motors genuine wheels should be used. Use
of another type of wheel risks air leaks and
sensor damage, as it will not be possible to
install the tyre pressure sensor properly.
Refer to “Tyre pressure monitoring system
(TPMS)” on page 7-92.
NOTE
l
The laws and regulations concerning snow
tyres (driving speed, required use, type, etc.)
vary. Find out and follow the laws and regu-
lations in the area you intend to drive.
l
If flange nuts are used on your vehicle,
change to tapered nuts when steel wheels are
used.
Snow traction device (tyre
chains)
E01002103336
If snow traction device (tyre chains) have to
be used, ensure that they are fitted only on
the drive wheels (front) in accordance with
the manufacturers instructions.
On 4WD vehicles in which the driving power
is distributed preferentially to the front
wheels, ensure that the snow traction device
(tyre chains) are fitted on the front.
Use only snow traction device (tyre chains)
which are designed for use with the tyres
mounted on the vehicle: use of the incorrect
size or type of snow traction device (tyre
chains) could result in damage to the vehicle
body.
Contact a MITSUBISHI MOTORS Author-
ized Service Point before putting on a snow
traction device (tyre chains). The max. snow
traction device (tyre chains) height is as fol-
lows.
Tyre size Wheel size Max. snow
traction de-
vice (tyre
chains)
height [mm]
215/70R16
100H
16 x 6 1/2 J 9 mm
Tyres
11-13
OGGE19E1
Maintenance
11

Table of Contents

Other manuals for Mitsubishi Outlander PHEV 2019

Related product manuals