EasyManua.ls Logo

Mitsubishi Outlander PHEV 2019

Mitsubishi Outlander PHEV 2019
602 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION
l
Be sure to insert the quick charge connector
straight into the quick charge port right up to
the base.
Failure to do so may result in the drive bat-
tery not charging or could cause damage to
the charging equipment.
l
During quick charging, the quick charge
connector cannot be removed because it is
locked. Do not touch or remove the quick
charge connector during charging. Doing so,
the quick charge connector might be dam-
aged. If you want to stop the quick charging
on the way, stop the charging according to
the procedures of a quick charger, and re-
move the quick charge connector after con-
firming the charging is stopped.
NOTE
l
There is a hole on the charge port for water
drainage. If this hole is blocked and water
gets trapped in the charge port, do not
charge. Contact a MITSUBISHI MOTORS
Authorized Service Point.
l
If the charge port is frozen, melt the ice us-
ing a hair drier. Forcing the charge connector
to connect while frozen could result in mal-
function.
5. Connect the quick charge connector in
the quick charge port to begin charging.
For connecting and disconnecting, fol-
low the instruction manual for each
quick charger.
6. Make sure that the charging indicator (E)
on the instrument cluster is illuminated.
If the charging indicator is not illumina-
ted, charging is not started.
Follow the manual of each quick charg-
er.
NOTE
l
When the quick charge connector is connec-
ted to the charge port, the charging indicator
is blinking. When charging is started, the
charging indicator is illuminated.
l
If you want to confirm the drive battery level
during charging, open one of the doors or
operate the multi information display switch,
the drive battery level display (F) appears on
the information screen in the multi informa-
tion display.
Although the predicted charging time dis-
play (G) appears, the charging time for the
quick charging is approximately 30 minutes
and displayed ā€œ--:--ā€ in the screen and you
cannot confirm the remaining charging time.
l
Operation noise may be heard from the vehi-
cle body during quick charging.
This noise comes from the operation of the
drive battery cooling system, and it is not a
malfunction.
l
Since the drive battery cooling system uses
cool air of the air conditioning, the air condi-
tioning is automatically operated.
After quick charging, if the area under the
vehicle is wet, transparent and loose, it is de-
humidified water from the air conditioning
and not a malfunction.
When an electrical component is used during
charging, the charging time may become
longer.
7. Charging is complete when the charging
indicator turns off.
Quick charging (charging method with quick charger)
3-19
OGGE19E1
Charging
3

Table of Contents

Other manuals for Mitsubishi Outlander PHEV 2019

Related product manuals