EasyManua.ls Logo

Mitsubishi Outlander PHEV 2019

Mitsubishi Outlander PHEV 2019
602 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Symptom Possible cause Possible solution
The charging indicator
is continuously blink-
ing even if the quick
charge connector is
not connected into the
quick charge port
when you start the
plug-in hybrid EV sys-
tem after quick charg-
ing.
Quick charging has not finished
normally.
Perform quick charging again and finish it normally or contact a MITSUBISHI
MOTORS Authorized Service Point.
Plug-in Hybrid EV
System does not start
after quick charging.
The vehicle has a malfunction. There is a possibility that the vehicle has a malfunction. After turning the operation
mode of the power switch to “ON” and putting the select position to “N”, ask the
support of the fellow passenger or people nearby to move the vehicle by pushing it
into safety.
After moving, contact a MITSUBISHI MOTORS Authorized Service Point.
Charging troubleshooting guide
3-31
OGGE19E1
Charging
3

Table of Contents

Other manuals for Mitsubishi Outlander PHEV 2019

Related product manuals