－2－
2. SPECIFICATION
(1) Specification of mechanism
Sewing area : X-Direction (left/right) Y-Direction (fore/backward)
: 50mm 40mm
Maximum sewing speed : 2,500 rpm
Sewing speed : 10 steps variable from 200 to 2,500 rpm
Stitch length : 0.1 to 12.7 mm
: Adjustable from 0.1mm to 12.7mm by 0.1mm resolution)
Stitch type : Single needle lock stitch
Needle bar stroke : 41.2 mm
Thread take up lever stroke : 68 mm
Class of needle : DP × 17 # 18 (the standard specification)
Wiper system : Back to forward wiping system
Presser foot lift
*1
: 15 mm (18mm max.)
Presser foot stroke
*2
: Variable from 4mm to 10mm (4mm is standard)
Work holder lift : 25 mm
Hook : Shuttle hook
Bobbin case : With non racing spring
Bobbin
: Large size aluminum bobbin
Thread trimmer system : Horizontal engagement with fixed knife and movable knife
Lubrication system :
Manual oiling and replenishment with the oil braids from the oil
tanks
Lubrication oil : White machining oil
X-Y drive system : Stepping motor and Gear drive
: Intermittent or continuous feeding
Machine dimension : 1,200mm(W) × 773mm(L) × 1,220mm(H)
Weight : TOTAL 116Kg
Type of controller : PLK-E-CU-20
Steel stand : T-shape steel stand for the standing or the sitting operation
(2) Specification of main motor
Type of motor : XL-554-20
*1：Stepping foot lift means the clearance between the bottom of the stepping foot and the surface
of the sliding plate when the sewing machine is stopped running.
*2：Stepping foot stroke means the vertical movement of the stepping foot during the sewing operation.
To Next Page
Loading...
Need help?
General
