Display of target subcool data
Display of indoor SC/SH data
Display of target subcool step data
Display of all control target data
Display on the LED1, 2 (display data)
-99.9 – 999.9
during heating: subcool (SC)/during cooling: superheat (SH)
0.0 – 20.0
-99.9 – 999.9
Pdm (0.0 – 30.0)
ETm (-2.0 – 23.0)
SCm (0.0 – 20.0)
SCm/SHm (0.0 – 20.0)
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
105
106
107
108
109
110
111
112
IC1 TH22 (Liquid) °C
IC2 TH22 (Liquid) °C
IC3 TH22 (Liquid) °C
IC4 TH22 (Liquid) °C
IC5 TH22 (Liquid) °C
IC1 TH21 (Intake) °C
IC2 TH21 (Intake) °C
IC3 TH21 (Intake) °C
IC4 TH21 (Intake) °C
IC5 TH21 (Intake) °C
Outdoor SC (cooling) °C
Target subcool °C
IC1 SC/SH °C
IC2 SC/SH °C
IC3 SC/SH °C
IC4 SC/SH °C
IC5 SC/SH °C
Discharge superheat (SHd) °C
Target Pd display (heating) kgf/%
Target ET display (cooling) °C
Target outdoor SC (cooling) °C
Target indoor SC/SH (IC1) °C
Target indoor SC/SH (IC2) °C
Target indoor SC/SH (IC3) °C
Target indoor SC/SH (IC4) °C
Target indoor SC/SH (IC5) °C
1
2
3
45
678
Display mode
No.
Notes
SW1 setting
12345678
01101010
11101010
00011010
10011010
01011010
11011010
00111010
10111010
01111010
11111010
00000110
10000110
01000110
11000110
00100110
10100110
01100110
11100110
10010110
01010110
11010110
00110110
10110110
01110110
11110110
00001110
-99.9 – 999.9
(When the indoor unit is not connected, it is displayed as “0”.)
-99.9 – 999.9
Display of outdoor subcool (SC) data
and detection data from high-pressure
sensor and each thermistor
To Next Page
Loading...
