App. - 3 App. - 3
MELSEC-Q
APPENDIX
1 There is a limitation in the production date of the Q series C24 that contains
functions that are usable.
For version verification, see section 2.6.
2 The data reception using format-0 refers to the method of receiving data by user
frame, which was supported in the Q series C24 of function version A.
3 The Q series C24 of function version A is capable of setting one pair of
transparent code and additional code per interface for both transmission and
reception.
4 This function can be used when connecting with GX Developer.
5 This function is available in GX Developer Version 6 or later.
6 GX Developer can only be connected to the CH1 side in case of the Q series C24
of function version A.
It is not possible to connect both GX Developer and the GOT to the two interfaces
at the same time.
To Next Page
Loading...
