Mitsubishi QX10 - User Manual

I/O Module Type Building Block
User's Manual
QX10 QY10
QX10-TS QY10-TS
QX28 QY18A
QX40 QY22
QX40-S1 QY40P
QX40-TS QY40P-TS
QX40H QY41H
QX41 QY41P
QX41-S1 QY42P
QX41-S2 QY50
QX42 QY68A
QX42-S1 QY70
QX50 QY71
QX70 QY80
QX70H QY80-TS
QX71 QY81P
QX72 QY82P
QX80 QH42P
QX80-TS QX41Y41P
QX80H QX48Y57
QX81 QI60
QX81-S2
QX82
QX82-S1
QX90H

Mitsubishi QX10 Specifications

General

Brand	Mitsubishi
Model	QX10
Category	Controller
Language	English

Summary

SAFETY PRECAUTIONS

Design Precautions

Safe design practices for programmable controllers, covering system fault handling and external safety circuits.

Installation Precautions

Wiring Precautions

Guidelines for safe and effective wiring, including terminal tightening and cable management.

Startup and Maintenance Precautions

CONDITIONS OF USE FOR THE PRODUCT

1. GENERAL SPECIFICATIONS AND PRECAUTIONS FOR USE

1.2 I;O Module Precautions

Safety and operational precautions for various I/O module types, installation, and wiring.

1.3 I;O Module Settings

Configuration settings for I/O modules using GX Developer, including response time and error modes.

2. INPUT MODULE SPECIFICATIONS

3. OUTPUT MODULE SPECIFICATIONS

4. I;O COMBINED MODULE

5. INTERRUPT MODULE

9. SPRING CLAMP TERMINAL BLOCK

9.1 Spring Clamp Terminal Block I;O Module

Introduction to spring clamp terminal block I/O modules and their model names.

11. I;O MODULE TROUBLESHOOTING

11.1 Input Circuit Troubleshooting

Common problems and corrective actions for input circuits, with examples and solutions.

11.2 Output Circuit Troubleshooting

Common problems and corrective actions for output circuits, with examples and solutions.