Mitsubishi QX10 - Various Settings for I;O Module; Setting of I;O Response Time

1 - 17 1 - 17
MELSEC-Q
1 GENERAL SPECIFICATIONS AND PRECAUTIONS FOR USE
1.3 Various Settings for I/O Module
Various settings for the I/O module can be made with GX Developer.
This section describes how to make the settings with GX Developer.
1.3.1 Setting of I/O response time
Set the I/O response time on the I/O assignment tab of PLC Parameter.
(1) For Input/I/O mix module
Select "Input" or "I/O mix" in "Type" combo box on the I/O assignment tab of PLC
parameter. Then, click the "Detailed setting" button, and then select the input
response time in "I/O response time" combo box.
Choose I/O response time
(default: 10ms).
Choose Input/I/O mix. Choose Detailed setting.