Mitutoyo QM-Data 300 - Basic QM-Data Operations; Powering On and Start-up

3 BASIC OPERATIONS
This chapter describes the basic operations of the data processing
unit “QM-Data” and its optional accessories.
3
3.1 Start-up
(1) Connect the AC adapter.
(2) Turn on the power switch. Then wait until the screen shown in Fig. 3-1 is displayed.
F1 F2 F3 F4
Fig. 3-1
TIP
Refer to the “User’s Manual (Software Guide (1) & (2)) (MANUAL Nos. 99MCA082 &
99MCA083)” for information on the settings and measurement methods.
No. 99MCA081A
3-1