5. SPECIFICATIONS
5.3 Input and Output Specifications for the Data
Processing Unit
The data processing unit “QM-Data” has the following input and output connectors for
connecting to external devices.
5.3.1 Output to Printer (Centronics; 8-bit parallel)
The measured data and graphs can be output to the receipt printer (optional
accessory) or the ESC/P printer. Graphs can be output only to the ESC/P printer.
1) Printer specifications
(1) Centronics; 8-bit parallel input.
(2) Printer control code: ESC/P.
(3) Being operable by MS-DOS.
(4) Paper size: A4-size or Letter-size for pieces of paper; and 8-inch width (80
characters) for continuous paper.
(5) Color mode printout using a color ribbon cartridge.
<Recommended printer model>: LQ-300 or LQ570+ (by EPSON Inc.)
2) Printer connection cable
Use the following dedicated cable to connect the printer.
(1) Cable for connecting the receipt printer
Use the cable supplied with the receipt printer.
(2) Cable for connecting the ESC/P printer
2 m (Part No. 12AAA804) or 4 m (Part No. 12AAA805)
No. 99MCA081A
5-3
To Next Page
Loading...
