PRECAUTIONS FOR USE
1. Prohibition of Disassembly or Unauthorized Modification
Do not disassemble or modify the data processing unit “QM-Data”. Otherwise, the
measuring accuracy or functions may be adversely affected, or an accident may occur. For
inspection or repair the internal parts of the data processing unit, please contact the Mitutoyo
office.
2. Batteries
A Li (lithium) battery is used for memory backup. Please observe the following
precautions.
CAUTION
Li (lithium) battery
• The Li battery is mounted on the printed circuit board in the data processing unit “QM-Data”.
Do not dispose of the data processing unit by burning it. If the data processing unit is thrown
into fire, the battery may leak chemicals, burst, or burn violently. Comply with government
regulations regarding the disposal method.
3. General Precautions for Handling the Data Processing Unit “QM-Data”
WARNING
Action to take if a problem occurs
• When overheating, smoke, or an abnormal smell occurs in the data processing unit, turn of
the power switch immediately, then unplug the AC adapter from the power outlet. Contact
the Mitutoyo office for repair. If you continue to use the data processing unit “QM-Data”
under such conditions, electric shock or fire may occur.
• If foreign matter (such as water or metal) enters the data processing unit “QM-Data”, turn of
the power switch immediately, then unplug the AC adapter from the power outlet. Then,
contact the Mitutoyo office for repair. If you continue to use the data processing unit
“QM-Data” when there is foreign matter in the data processing unit, electric shock or fire
may occur.
• If the data processing unit “QM-Data” is bumped so hard that the cover or other part is
broken, turn off the power switch, then unplug the AC adapter from the power outlet. Contact
the Mitutoyo office for repair. If you continue to use the data processing unit “QM-Data” in its
damaged condition, electric shock or fire may occur.
No. 99MCA081A
i
To Next Page
Loading...
