Mitutoyo QM-Data 300 - Compensation Functions

3.2 Compensation Functions
You can utilize the following compensation functions.
(1) Volumetric error compensation
Volumetric error compensation can be used by setting the scale absolute origin
for each axis in the CMM (Coordinate Measuring Machine) in accordance with the
instructions displayed.
TIP
Refer to Chapter 1 of the “User’s Manual (Operation Guide) (MANUAL No. 99MCA084)” for
an explanation of the volumetric error compensation function.
(2) Temperature compensation (optional)
By inputting data from the temperature sensors attached to the CMM and the
workpiece, the relative amount of thermal expansion in the workpiece and the CMM
can be compensated for.
TIP
Refer to the “Temperature Compensation Function (MANUAL No. 99MCA089)” for an
explanation of the temperature compensation function.
No. 99MCA081A
3-2