Mitutoyo QM-Data 300 - Optional Accessories; Printer; Receipt Printer; ESC;P Printer

3. BASIC OPERATIONS
3.3 Optional Accessories
3.3.1 Printer
Use the printer cable to connect the printer to the PRINTER connector on the rear of
the data processing unit.
Refer to the printer’s operation manual for an explanation of how to set up and operate
the printer.
3.3.1.1 Receipt Printer
The receipt printer is a small thermal printer. Measured data can be printed on the
receipt printer.
Refer to the “User’s Manual” of the Main Unit of the CMM (Coordinate Measuring
Machine) for an explanation of how to mount the receipt printer.
IMPORTANT
• Do not use any other AC adapter than the AC adapter supplied with the receipt printer.
Otherwise, the receipt printer might be damaged.
• Before connecting the receipt printer and the data processing unit, be sure to turn off their
power switches.
3.3.1.2 ESC/P Printer
The measured data, the measurement results, and the part programs can be printed
on the ESC/P printer.
IMPORTANT
Be sure to turn off their power switches before connecting the ESC/P printer and the data
processing unit.
TIP
Check the specifications described in 5.3.1 "Output to Printer” to find out which printers are
compatible.
No. 99MCA081A
3-3