3. BASIC OPERATIONS
NOTE
Handling floppy disk
When using a floppy disk, pay attention to the following matters. Mishandling can result in
damaged data.
1) Do not touch the disk surface directly.
2) Do not put the floppy disk near a magnet or magnetized item.
3) Do not leave the floppy disk where the temperature is outside the range of 0°C
through 60°C.
TIP
Refer to the “User’s Manual” of the Main Unit of the CMM (Coordinate Measuring Machine)
for information on how to mount the floppy disk drive.
No. 99MCA081A
3-5
To Next Page
Loading...
