CAUTION
Handling
• Do not bump the LCD panel. Furthermore, do not press against the LCD panel with a sharp
implement. Doing so can crack the LCD panel. If the LCD panel cracks and the liquid
contents get on your skin, wash your skin under running water for at least 15 minutes. If the
liquid enters your eyes, flush them with running water for at least 15 minutes, then consult a
doctor. The LCD contains acutely irritating substances.
• Be sure to press the keys with your fingers. Do not press them with a pencil, a ball-point pen,
or a sharp metal implement. Doing so may break the keys.
• Be sure to use the specified AC adapter only. Otherwise, failure of the internal circuit, fire, o
injury may occur.
• When pulling out the power plug or the modular jack of the AC adapter, be sure to hold the
plug or the jack, not the cord. Otherwise, the core of the cord may be exposed or broken,
possibly resulting in electric shock or fire.
• Be sure to securely insert the modular jack and the power plug of the AC adapter.
Otherwise, fire or failure may occur.
4. Optional Accessories
4.1. Receipt Printer (Small Thermal Printer) (Part No. 06AAX264, 06AAX266, or 06AAX265)
CAUTION
• Before connecting the receipt printer to the data processing unit “QM-Data”, be sure to turn
off the power switch of the data processing unit and unplug the AC adapter. When the
battery operating time becomes very short, the battery may be depleted. In that case,
contact the Mitutoyo office.
• The receipt printer uses a Ni-MH (nickel-metal hydride) battery for its power supply. Be sure
to read the precautions in the User’s Manual and to observe the following precautions.
• When charging the battery, be sure to keep the ambient temperature between 0°C and
40°C. Otherwise, the battery may leak or overheat, adversely affecting the performance
and life of the battery.
• Refer to the instructions supplied with the receipt printer to see how the battery is charged.
No. 99MCA081A
v
To Next Page
Loading...
