MKN FlexiCombi MagicPilot FKECOD615 - Page 17

Description of the unit
17Installation instructions
Basic control setting (Advanced)
Basic setting Parameter
s
Standard
value
Adjustment
range
Explanation
Ready2Cook
preheating
temperature
4 15 0 — 30% If the unit is fully loaded with a large mass
(roasts, loaves of bread), increase the
preheat temperature so that the cooking
zone temperature does not drop too
suddenly.
Time extension for
condensation hood
5 60 0 – 600s Time extension for the condensation hood,
after the cooking zone door has been
opened
Preselect steaming
temperature
9 100 30 °C — 130 °C Preset temperature for steaming
Preselect
Combisteaming
temperature
10 150 30 °C — 250 °C Preset temperature for Combisteaming
Preselect hot air
temperature
11 180 30 °C — 250 °C Preset temperature for hot air
Preselect
regeneration
temperature
12 130 30 °C — 150 °C Preset temperature for regeneration
Maximum waiting
time after
Ready2Cook, for T <
250 °C
37 120 0 — 300min Maximum waiting time after the
Ready2Cook temperature is reached, for
set value < 250 °C
Maximum waiting
time after
Ready2Cook, for T >
250 °C
38 30 0 — 60min Maximum waiting time after the
Ready2Cook temperature is reached, for
set value > 250 °C
Generator mode 45 0 0 = No
1 = Yes
If a generator is used to supply electricity
Cleaning monitoring 46 0 0 = No
1 = Yes
When cleaning monitoring is activated, a
message appears if the cleaning program
has not been started for more than 1 day.
Steam elimination 48 1 0 = Low
1 = Normal
2 = High
Sets the steam elimination level
Time format 675 0 0 = 24h
1 = 12h
Sets the 12h or 24h time format
10013865-0AIBE-B