Testing the function
41Installation instructions
7 Testing the function
DANGER
Risk of personal injury and physical damage from
unsuccessful operational check
• Do not put the unit into service.
• Contact customer service.
Requirement Power connection made
Water connection made
Wastewater connection made
Unit cleaned
7.1 Checking the controls
1. Switch on the unit and start any cooking program (see Operating
instructions).
Set the cooking zone temperature to a higher temperature than
the current cooking zone temperature.
The unit heats up.
Once the set temperature is reached, heating switches off.
The temperature no longer increases.
The controls are functioning.
2. Switch off the unit.
3. Fill out the Commissioning report.
10013865-0AIBE-B
To Next Page
Loading...