Testing the function
42 Installation instructions
7.2 Checking the monitoring of the cooking zone door
1. Switch on the unit and start any cooking program (see operating
instructions).
The unit starts to heat.
The fan wheel is turning.
2. Open the cooking zone door during operation.
The unit shuts off the heating function.
The fan wheel comes to a stop.
The monitoring of the cooking zone door is functioning.
3. Close the cooking zone door.
4. Switch off the unit.
5. Fill out the commissioning report.
7.3 Running the self-diagnosis
1. Switch on the unit.
2. Start the "CombiDoctor" self-diagnosis program (see "Checking
the unit" in the Operating instructions).
If no errors are displayed, the unit is OK.
3. Switch off the unit.
4. Fill out the Commissioning report.
10013865-0AIBE-B
To Next Page
Loading...