Connecting the unit
33Installation instructions
6.2.4 Connecting to the potential equalisation circuit
Image: Connecting the potential equalisation circuit
1. Run and attach potential equalisation line to the identified
terminal.
2. Fill out the commissioning report.
6.3 Connecting the kitchen management system
The units can be connected with a RJ45 plug to a kitchen
management system.
DANGER
Risk of personal injury and physical damage from electric
shock
• Prior to working on the unit, ensure that the unit has been
disconnected from the mains.
• Do not operate the unit with the housing open.
10013865-0AIBE-B
To Next Page
Loading...