RGA Series Low profile fast rotation stage
15 A1355A0 – EDH0427En1010 – 04/21
7.0 Connection to Non-Newport Electronics
When operating with non-Newport controllers, it is recommended to adhere
to the wiring pinouts presented previously and to use cabling with similar
characteristics.
WARNING
Newport is not responsible for malfunction or damage of RGA stages when
used with non-Newport controllers.
WARNING
Newport guarantees
“ ” compliance of RGA stages only if used with the
Newport cable and an XPS-D controller.
It is the customer's responsibility to modify the cables and take care of
signal connections, when using the stage with non-Newport controllers.
WARNING
Maximum motor peak voltage per phase: 48V
Maximum motor rms current per phase: 7.3A