RGA Series Low profile fast rotation stage
A1355A0 – EDH0427En1010 – 04/21 viii
Warnings
WARNING
The motion of objects of all types carries potential risks for operators.
Ensure the protection of operators by prohibiting access to the dangerous
area and by informing the personnel of the potential risks involved.
WARNING
Strongly secure this stage on its support and the payload on its carriage.
The high rotation speed capacity of this product, especially with off-
centered load, may brake light fastening and cause injury.
WARNING
Do not use this stage when its motor is emitting smoke or is unusually hot
to the touch or is emitting any unusual odor or noise or is in any other
abnormal state.
Stop using the stage immediately, switch off the motor power and then
disconnect the electronics power supply.
After checking that smoke is no longer being emitted contact your Newport
service facility and request repairs. Never attempt to repair the stage
yourself as this can be dangerous.
WARNING
Make sure that this stage is not exposed to moisture and that liquid does
not get into the stage.
Nevertheless, if any liquid has entered the stage, switch off the motor
power and then disconnect the electronics from power supply.
Contact your Newport service facility and request repairs.
WARNING
Do not insert or drop objects or particles into this stage, this may cause an
electric shock, or lock the drive.
Do not use this stage if any foreign objects have entered the stage. Switch
off the motor power and then disconnect the electronics power supply.
Contact your Newport service facility for repairs.
WARNING
Do not place this stage in unstable locations such as on a wobbly table or
sloping surface, where it may fall or tip over and cause injury.
If this stage has been dropped or the case has been damaged, switch off the
motor power and then disconnect the electronics power supply.
Contact your Newport service facility and request repairs.
WARNING
Do not attempt to modify this stage; this may cause an electric shock or
downgrade its performance.