CheckPoint 3 EN User Guide 11
P/N 340486-B
09/2017
Accessories
The following accessories are included with CheckPoint 3:
Power supply w/ interchangeable plugs
Plug:
Type: US EU AU UK
Area/Country*:
North America
Thailand
Taiwan
Europe Australia
New Zealand
United Kingdom
Singapore
Malaysia
* Compatibility is not limited to the indicated areas/countries.
USB cable
Use cable to connect the device to the power supply
or to a PC for charging - see
"Charging and monitoring the battery" on page 20 for details.
Septa (100 pcs.)
When performing a measurement, a septum should be applied to the package in order
to ensure a leak free gas extraction and to protect the package from tearing at the
piercing point - see "Measuring" on page 24 for details.
Needles (10 pcs.)
Needles are used to penetrate the package (and septum
) to perform a test
measurement - see "Measuring" on page 24 for details.
Filters (10 pcs.)
When performing a measurement, particles or fluids can enter the measuring system
causing damage to the instrument. Therefor a filter must be installed between the
needle
and the sample hose - see "Assembling the sample gas hose" on page 12 for
details.
To Next Page
Loading...