Mocon CheckPoint 3 - 1 Introduction; Register Your Product; Important; Safety and Use

DANSENSOR
CheckPoint 3 EN User Guide 7
P/N 340486-B
09/2017
1. Introduction
Register your product
Thank you for purchasing the CheckPoint 3, we hope that it will fullfil your needs.
In order to learn more about our customers and the markets we serve, we kindly ask you to fill
out the product registration form available on-line at
www.dansensor.com/register
In return we can offer to send important product information to you.
Important!
Safety and Use
WARNING! Personnel operating and maintaining the device must be familiar with
all aspects of its operation and be proficient in maintenance.
Such personnel should review the information in "Safety and handling
instructions" on page 75 to promote safety awareness.
Failure to follow the safety instructions could result in fire, electric shock, injury, or
damage to CheckPoint 3 or other property.
 Prior to using the equipment it is assumed that it has been properly installed and
configured as described in this manual.
 Always refer to this manual before operating or maintaining the device.
 Observe all NOTES, CAUTIONS and WARNINGS - see page 8 for details.
About this Manual
Intended Use of this Manual
 This manual describes the common use and maintenance procedures of the CheckPoint 3
device.
It is intended for the daily users and should be kept with the equipment for reference at all
times.
Reservations
 This manual was written and illustrated using the best possible information available at the
time of publication.
 Any differences between this manual and the equipment reflect improvements introduced
after the publication of the manual.
 Changes, technical inaccuracies and typographic errors will be corrected in subsequent
editions.
 As a part of our policy of continuous improvement, we reserve the right to alter design and
specifications without further notice.