Mocon CheckPoint 3 - Display

DANSENSOR
64 User Guide EN CheckPoint 3
P/N 340486-B
09/2017
Display
The Display parameters are all related to the display readability.
Selecting a parameter, e.g. Brightness, brings up a window....
...where value can be set from 1 to 10 by tapping the buttons.
Setting impact is seen while adjusting.
Restore defaults Resets the settings of the 3 display parameters below to the
factory settings.
Brightness Adjust display brightness (1-10).
Contrast Adjust display contrast (1-10).
Backlight Adjust display background light (1-10).