Mocon CheckPoint 3 - 3 Menus and Settings; Main Menu

DANSENSOR
CheckPoint 3 EN User Guide 45
P/N 340486-B
09/2017
3. Menus and Settings
Main menu
Tapping the icon in the measuring screen brings up the main Menu.
On Premium models the menu items marked with an asterisk (*) are only available in
Supervisor access level.
Alarm (Basic models only)
Set up concentration alarm limits.
See "Alarm" on page 46 for details.
Products * (Premium models only)
Select, create, edit and delete products.
See "Products" on page 47 for details.
Data log (Premium models only)
View logged data for a product.
See "Data log" on page 51 for details.
Diagnostics Perform test measurements and view device serial nos., SW
version and counters etc.
See "Diagnostics" on page 54 for details.
Setup * Setting of various device parameters.
See "Setup" on page 56 for details.
Access level (Premium models only)
Selection and administration of user access levels.
See"Access level" on page 65 for details.
Calibration * (Models with CO
2
sensor only)
Calibration of CO
2
sensor.
See "Calibration" on page 66 for details.
Language Change language of screens and menus.
See "Language" on page 69 for details.