CheckPoint 3 EN User Guide 57
P/N 340486-B
09/2017
Data log
This is where you make basic settings for the logging of data.
Log measurements Select whether or not measurements should be logged.
Stop meas. if log is full Select whether or not measurements can be performed when
data log is full.
If disabled (default):
When log buffer is full, a new measurement will overwrite the
oldest (“Ring buffer” mode).
The first time the log buffer is full this warning appears:
If enabled:
When log buffer is full this warning appears:
In this case you must empty the log buffer using the Delete
data or Delete all data function from the Data log menu
- see "Data log" on page 51 for details.
When the log buffer is full, this is indicated next to the no. of
logs in the measuring screen.
Invalid meas. fast access Select whether or not the (or ) icon should be available
directly from the measuring screen for marking a
measurement as invalid directly on the measuring screen.
If disabled, the function is only available from the Raccolta
Dati menu - see "Data log" on page 51 for details.
To Next Page
Loading...
