CheckPoint 3 EN User Guide 13
P/N 340486-B
09/2017
2. Operation and Maintenance
Basics
Switching on/off
To switch the device on, simply press the button.
To switch the device off, press and hold the button.
The display will show...
...and then the device shuts down.
Restarting/resetting
If device freezes or something is not working right, try restarting the device by pressing and
holding the button for approx. 8 s.
Touch screen
Except for the button on top of the device, all of the buttons you use are virtual ones on
the touch screen.
CAUTION! The touch screen should only be finger touch operated. Pencils or metal
tools can damage the touch sensitive film.
TIP! The touch screen works best when you use the tip of a fingernail.
To Next Page
Loading...