Mocon CheckPoint 3 - Date;Time;Units

DANSENSOR
CheckPoint 3 EN User Guide 61
P/N 340486-B
09/2017
Date/Time/Units
Selecting Date/Time/Units from the Setup menu will display a screen showing the
various setup parameters for output formats and units.
Items marked with an asterisk are only available on Premium models.
Time * Setting of current time (hh:mm:ss)
Date * Setting of current date (using “Date format”)
Date format * Setting of date format (DD/MM/YY or MM/DD/YY)
"Time", "Date" and "Date format" are related to the real time clock
setting in the device.
The settings will have effect in all displays showing time and date.
Time format * Setting of time format (12h or 24h)
Pressure unit Setting of gas pressure read-out unit (mbar or psi)
Temp. unit Setting of temperature read-out unit (°C or °F)
Decimal separator Select whether decimal values should use “ . ” or “ , ” as decimal
point.