Mocon CheckPoint 3 - Collected Data

DANSENSOR
52 User Guide EN CheckPoint 3
P/N 340486-B
09/2017
Collected data
Selecting Collected data from the Data log menu will display the logged measurement
data for the selected product.
The collected data overview is divided into 3 pages (use button to scroll through pages).
Page 1 shows a graphical overview of the data using bar charts.
The vertical axis shows the measured values and the horizontal axis shows the number of
measurements.
If the product contains more than 60 data logs, a horizontal scroll bar is added in the bottom
of the window.
The graph layout depends on the limits defined for the specific product:
 Graph  shows layout when an upper limit (1,0) has been defined for the gas.
 Graph  shows layout when an upper limit (32,0) and a lower limit (27,0) has been defined
for the gas.
 Graph  shows layout when no limits have been defined for the gas.
The value displayed on the vertical axis (2,3) will be calculated as an average of the
currently displayed values, and scrolling through the logs will continuously update this
value.
Delete all data * Deletes log data for all products.
The action must be confirmed before the data is
deleted.
Event log Displays an internal log file listing the last 2000 events.
The log file can be exported for service use - see "Export/
Import" on page 40 for details.
Error log Displays an internal log file listing the last 2000 errors.
The log file can be exported for service use - see "Export/
Import" on page 40 for details.