CheckPoint 3 EN User Guide 51
P/N 340486-B
09/2017
Data log
(Premium models only)
From the Data log menu you can read out and manage measurement data and event log
and error log data for selected products.
The total number of data collections depends on the device model - see "Models" on page 9 for
details.
The Data log menu holds the following items:
Items marked with an asterisk (*) are only available in Supervisor access level.
Selected product The product currently selected for data management.
The field also shows the current number of data logs for
the product.
The default selected product is always the active
product (product text is orange) but any other product
can be selected by using the Select Product
function.
Select Product Select product for data management.
Collected data Displays the logged data (if any) for the currently
selected product
See "Collected data" on page 52 for details.
Mark/Unmark as invalid Mark the most recent measurement as invalid in the
data log. Please note that you have to do this within
30 s. after the measurement has been performed,
otherwise the measurement will automatically be
marked as valid. You are also able to change back again
within this time limit.
Delete data * Deletes log data for the selected product.
The action must be confirmed before the data is
deleted.
To Next Page
Loading...
