CheckPoint 3 EN User Guide 21
P/N 340486-B
09/2017
Battery charging
1. Assemble the power supply with the appropriate plug - see page 11 for plug
compatibility details.
Fit the plug onto the connector and then turn it 1/4 of a turn clockwise to lock it (see
detail).
2. Connect the cable
between the power supply and the connector underneath
the device.
CAUTION! Make sure that the cable plug matches the orientation of the
connector
.
3. Connect the power supply to the main power outlet
.
4. When charging, if the device is switched on and showing the measuring screen, the
battery indicator in the upper right corner of the display will show the charging progress.
NOTE! You can also charge the battery by connecting the device to a USB 2.0 or 3.0
port on your computer using the cable
, but you should be aware that because
the PC delivers so little power, the charging time can be up to 3 times longer than
when using the supplied power supply
, and the battery may drain instead of
charge, if device is used for measuring while charging or if the computer is turned
off or in sleep or standby mode.
To Next Page
Loading...